Shaped for Success


Superior Physical Properties

The materials used to make Biolight DUAL posts continually excel in independent studies and evaluations.

1. Superior Fatigue Resistance

Tested to 3,000,000 cycles of resistance to failure in fatigue testing.

When compared against popular brands of fiber posts, the Biolight DUAL post material has shown statistically superior resistance to breakdown from repeated cyclical stresses. This type of cyclical testing shows the ability of a post to stand up to the intraoral rigours of continual flex during mastication.


3. Superior Shear Modulus

A recent independent university study comparing the shear modulus of various fiber posts produced these results:

Force required to BREAK post (MPa)



102.87 MPa

ParaPost® Taper Lux: 86.12 MPa
FRC Postec® Plus: 90 MPa
RelyX™ Fiber Post: 85.94 MPa

5. Superior Radiopacity

Simple in-house comparative testing shows that Biolight DUAL fiber posts are considerably more radiopaque than other popular high-radiopacity fiber posts.


1. Pentron®'s FiberKleer™
2. R.T.D.®'s D.T. Light-Post® Illusion™



4. Coltene®'s ParaPost® Fiber Lux
5. Coltene®'s ParaPost® Taper Lux

In an independent university study, The Biolight DUAL material against exhibited superior radiopacity to all other fiber posts tested:

Radiopacity of fiber posts




FRC Postec® Plus: 106.67
RelyX™ Fiber Post: 88.04
ParaPost® Taper Lux: 64.67

2. Superior Fracture Resistance

In a comparative evaluation of popular fiber posts by a renown independent institute, the Biolight DUAL material was #1 in fracture resistance.

Force required to FRACTURE post (MPa)



133 MPa

D.T. Light Post®: 117 MPa
Luscent Anchors™: 100 MPa
ParaPost® Fiber White: 99 MPa
Snowpost: 58 MPa
FiberKor™: 58 MPa

4. Superior Bond

In a head-to-head independent study, when compared against an epoxy resin fiber post, the Biolight DUAL material showed statistically superior bond to popular self-adhesive resin cements.

In another comparative post study, SEM revealed that the Biolight DUAL material exhibits more surface roughness that all other posts, which contributes to the superior bonding ability.

Biolight DUAL offered the same adhesion without any surface treatment, or with treatment of either alcohol or H2O2 and silanization for 60 seconds.


6. Clinical radiography of Biolight DUAL in canal

dual_xray_teeth dual_xray_teeth

7. Epoxy and BisGMA-FREE

All Biolight and FiBER FORCE products are manufactured without the use of either Epoxy or bisGMA resins.

8. Excellent light transmission

Excellent light transmission for use with dual-cure resins, Biolight DUAL offer excellent light transmission through the optic fiber material.


® or ™: Registered trademarks or trademarks of their respective manufacturer.

Biolight TEMP

Every post and core case needs a temporary crown and Biolight TEMP is our new companion product to Biolight DUAL fiber posts.

Our new German temporary crown and bridge multifunctional acrylic composite is suitable for the fabrication of temporary crowns, partial crowns, bridges, inlays, onlays and veneers, including long-term temporary restorations. It offers outstanding mechanical properties, is easy to use and costs significantly less than current leading brands.

>More info on Biolight TEMP
biolight temp