CST products

FiBER FORCE® CST® Complete Kit

2 - 17.75” (450mm) FiBER FORCE® CST® Pink Hybrid Compressible Fiber (1:6)
2 - 11.75” (300mm) FiBER FORCE® CST® Pink Hybrid Compressible Fiber (1:4)
1 - 3ml syringe of FiBER FORCE® CST® Flow Pink Resin with tips
4 - FiBER FORCE® CST® Temporary Support Pillars
Accessories / Instructions
1 - 5ml bottle of ENA BOND adhesive primer from Micerium®

Usage:
The best way to get started with CST®. Enough material to complete two CST® frameworks as well as accessory materials to be used over multiple cases.

BUY NOW!

FiBER FORCE® CST® Refill Kit

1 - 17.75” (450mm) FiBER FORCE® CST® Pink Hybrid Compressible Fiber (1:6)
1 - 11.75” (300mm) FiBER FORCE® CST® Pink Hybrid Compressible Fiber (1:4)
2 - FiBER FORCE® CST® Temporary Support Pillars
Accessories / Instructions

Usage:
Perfect when re-ordering the fibers and support pillars only. Enough for one framework.

BUY NOW!

FiBER FORCE® CST® 1:6 Hybrid Compressible Fiber

1 - 17.75” (450mm) FiBER FORCE® CST® Pink Hybrid Compressible Fiber (1:6)

Usage:
FiBER FORCE® CST® 1:6 hybrid compressible fibers are larger in diameter than the 1:4 hybrid compressible fibers and are used to create the three-dimensional base of the CST® framework. One package contains enough material to complete all required “runs” in the majority of 4 to 6 implant cases.

BUY NOW!

FiBER FORCE® CST® 1:4 Hybrid Compressible Fiber

1 - 11.75” (300mm) FiBER FORCE® CST® Pink Hybrid Compressible Fiber (1:4)

Usage:
FiBER FORCE® CST® 1:4 hybrid compressible fibers are smaller in diameter than the 1:6 hybrid compressible fibers and are used to create the “stays” or “stringers” of the CST® framework. One package contains enough material to complete all required “runs” in the majority of 4 to 6 implant cases.

BUY NOW!

FiBER FORCE® CST® Flow Pink Resin

1 - 3ml syringe of FiBER FORCE® CST® Flow Pink Resin with tips

Usage:
FiBER FORCE® CST® Flow pink resin is a light cured UDMA resin or composite. In the CST® technique it is used as wetting agent to facilitate placement of the FiBER FORCE® CST® hybrid compressible fibers.

BUY NOW!

FiBER FORCE® CST® Support Pillars

10 - FiBER FORCE® CST® Temporary Support Pillars

Usage:
FiBER FORCE® CST® support pillars are used (two per arch) to create a purchase point from which to start applying the hybrid compressible fibers and keep them in tension. They also demarcate the most distal position of the denture. FiBER FORCE® CST® support pillars are made of e-glass fibers (like the FiBER FORCE® CST® hybrid compressible fibers) and are fully compatible with the range of materials used in the CST® technique.

BUY NOW!